Hardware Analysis Community Forums http://www.hardwareanalysis.com/content/topic/70885/ 2008-10-15T18:53:57-05:00 http://www.hardwareanalysis.com/content/topic/70885/ http://media.hardwareanalysis.com/halogo.gif text/html 2008-03-02T19:22:52-05:00 Gerritt http://www.hardwareanalysis.com/content/topic/70885/?l=1#530541 On the A8N MB, you can set what you want the alerts to be for the CPU fan.<br /> If you've replaced the stock CPU Cooler from AMD, then you may be &quot;spinning&quot; at lower than normal (for the 80mm fan) speeds. You can modify this speed through BIOS, or as others have suggested just turn it off.<br /> <br /> Gerritt text/html 2008-03-02T12:35:17-05:00 El Seņor http://www.hardwareanalysis.com/content/topic/70885/?l=1#530519 Yes, if fan is spinning and temps are fine, just disable this warning in BIOS. My CPU heatsink fan happens to not have an RPM sensor so I had to disable it too. text/html 2008-03-02T07:08:07-05:00 Shadow_Ops_Airman1 http://www.hardwareanalysis.com/content/topic/70885/?l=1#530513 ok to tell you this, are the CPU temperatures high, cause if they are not just shut that feature off, i call it bitching betty cause it bitches about every little detail if its out of range or w/e. text/html 2008-03-02T06:07:49-05:00 Franck http://www.hardwareanalysis.com/content/topic/70885/?l=1#0 hi,<br /> i just finished setting up my pc and windows vista...<br /> but every time is reboot the pc , the bios says that cpu fain fails or speed to low&quot;<br /> <br /> i checked the cpu fan and notice that i connected it to cha2_fan to cpu , instead of the cpu fan .... but when i switched connection to cpu fan... the fan did not work....<br /> <br /> i think that my fan doesnt work properly but i want to have a second opinion before replacing it ....<br /> <br /> any ideas are welcomed.... thanks ....