Hardware Analysis Community Forums http://www.hardwareanalysis.com/content/topic/71080/ 2008-10-06T14:36:09-05:00 http://www.hardwareanalysis.com/content/topic/71080/ http://media.hardwareanalysis.com/halogo.gif text/html 2008-03-24T20:47:39-05:00 Sampl http://www.hardwareanalysis.com/content/topic/71080/?l=1#532022 Hi mathow, thanks for your quick reply... i've checked out the memory tab but it says nothing... just that its 4096Mb at the size box, the rest are all empty + CPUz says that Slot 1 and 2 are PC2-6400 (400Mhz) but 3 and 4 are PC2-5300 (333Mhz) with a complete different timings table.... i'm sure that the ram is identical they even have the same barcode number and all.... the only thing thats different is the warrenty label one has an xtra line with the voltage specs.... anyway.. what does this mean.. that the ram is not identical........ text/html 2008-03-24T18:51:00-05:00 Mothow http://www.hardwareanalysis.com/content/topic/71080/?l=1#532009 Dont worry about what it says in SPD go to the memory tab in cpuz.The SPD is showing you what the memories default ratings are .DDR2 1066 is just overclocked DDR2 533.There is no true DDR2 1066 its all just regular ram that OCs very well.Another words OCZ bins the chips to see what they can handle and rates them accordingly.<br /> <br /> <br /> CPUZ Memory tab. My DDR2800<br /> <a class="ext" href="/action/r/http://img106.imageshack.us/my.php?image=17757225mf7.jpg" target="_blank">http://img106.imageshack.us/my.php?image=17757225mf7.jpg</a><br /> <br /> CPUZ SPD tab with my DDR2 800<br /> <a class="ext" href="/action/r/http://img381.imageshack.us/my.php?image=vdzy4.jpg" target="_blank">http://img381.imageshack.us/my.php?image=vdzy4.jpg</a><br /> text/html 2008-03-24T16:58:32-05:00 Sampl http://www.hardwareanalysis.com/content/topic/71080/?l=1#0 ASUS M3A32-MVP Deluxe<br /> AMD Phenom X4 2,3Ghz<br /> 4x OCZ PC2-8500 1066Mhz Reaper Edition<br /> 2x ASUS EAH3870 512Mb DDR4 (CrossfireX)<br /> Windows Vista Home Premium 32Bit<br /> BIOS Stock Version<br /> <br /> Hi again.....<br /> i have set the memory to 1066Mhz in the BIOS but CPUz say's (at the spd) i have a max bandwith of PC2-5300 (333Mhz), did i do something wrong??? here are the specs for the OCZ sticks:<br /> <br /> 1066MHz DDR2 <br /> EPP 5-5-5-15<br /> (CAS-TRCD-TRP-TRAS) <br /> Available in 2GB (2x1024MB) Dual Channel Kits <br /> Unbuffered <br /> OCZ Lifetime Warranty <br /> 2.1 - 2.3** Volts <br /> 240 Pin DIMM <br /> <br /> Patent-pending Reaper HPC Heatsink* <br /> EPP-Ready <br /> <br /> and here is my BIOS setup:<br /> <br /> <i><u>Jumperfree Configuration</u></i><br /> AI overclocking [Manual]<br /> FSB Frequency [200]<br /> PCIE Frequency [100]<br /> Processor Frequency Multiplier [AUTO]<br /> Processor Voltage [AUTO]<br /> Processor-NB Voltage [AUTO]<br /> CPU VDDA Voltage [AUTO]<br /> CPU-NB HT Link Speed [AUTO]<br /> DDR Voltage [AUTO]<br /> Northbridge Voltage [AUTO]<br /> Southbridge Voltage [AUTO]<br /> Auto Xpress [AUTO]<br /> CPU tweak [Enabled]<br /> PLL1 Spread Spectrum [Disabled]<br /> PLL2 Spread Spectrum [Disabled]<br /> AI Clock Skew for Channel A [AUTO]<br /> Current Clock Skew Delay300ps <i>(Greyed out)</i><br /> AI Clock Skew for Channel B [AUTO]<br /> Current Clock Skew Delay300ps <i>(Greyed out)</i><br /> <br /> <br /> <u><i>Memory Configurations</i></u><br /> Bank Interleaving [AUTO]<br /> Channel Interleaving [AUTO]<br /> MemCLK Tristate C3/ATLVID [Disabled]<br /> Memory Hole Remapping [Enabled]<br /> Unganged Mode Support [Disabled]<br /> Power Down Enable [Disable]<br /> Read Delay [AUTO]<br /> DCQ Bypass Maximu [AUTO]<br /> <br /> <br /> <u><i>DRAM Timing Comfiguration</i></u><br /> Memory Clock Mode [Manual]<br /> Memclock Value [1066]<br /> 2T Mode [AUTO]<br /> DRAM Timing Mode [AUTO]<br /> <br /> <br /> <br /> hope anyone can help me... thank u<br />