Hardware Analysis Community Forums http://www.hardwareanalysis.com/content/topic/71354/ 2008-10-07T21:44:47-05:00 http://www.hardwareanalysis.com/content/topic/71354/ http://media.hardwareanalysis.com/halogo.gif text/html 2008-04-25T23:27:01-05:00 McFly http://www.hardwareanalysis.com/content/topic/71354/?l=1#534539 Mothow, what happened with you and your IHS on the X2? I've been thinking it might help bring the temps down ... but I don't really want to fux0r it up since 939 chips are hard to come by except on Craigslist these days ...<br /> <br /> Not to mention having to fiddle with the heatsink to have it make good contact. <img src="http://media.hardwareanalysis.com/smilies/smile6.gif" width="14" height="14" border="0" alt=":~" title=":~"> text/html 2008-04-24T23:25:54-05:00 McFly http://www.hardwareanalysis.com/content/topic/71354/?l=1#534445 Yah definitely lower your HTT multi. Mine is at 3x for 280x3 = 840. You'll find that even lowering it to 1x only has a TINY impact on real-world performance. text/html 2008-04-24T23:00:35-05:00 MrBungle http://www.hardwareanalysis.com/content/topic/71354/?l=1#534442 try reducing your HT mulitplier to 4x text/html 2008-04-24T22:38:17-05:00 McFly http://www.hardwareanalysis.com/content/topic/71354/?l=1#534437 Mothow, for some of us, the 939 days are still here. <img src="http://media.hardwareanalysis.com/smilies/smile5.gif" width="14" height="14" border="0" alt=":P" title=":P"><br /> <br /> I have that same CPU, Dex. I didn't have to crank the voltage up too much, what voltage do you have it at now? I couldn't for the life of me get her stable at 3.0GHz, but 2.8GHz is good for 12+ hours on Orthos, at 1.375V I think it is.<br /> <br /> You could try lowering the multi and upping the FSB, might have to use a mem divider then. text/html 2008-04-24T22:25:23-05:00 Mothow http://www.hardwareanalysis.com/content/topic/71354/?l=1#534435 Oh the good ole 939 days.I forget more than i remember about them.But the x2 3800+ was my favorite until i killed it by removing the IHS<img src="http://media.hardwareanalysis.com/smilies/smile12.gif" width="14" height="14" border="0" alt=":blush:" title=":blush:"><br /> <br /> Set vcore to 1.4v and fsb/multi and LDT(memory multi)300x9x3=2.7ghz.<br /> <br /> What ram are you using?<br /> If your using TCCD type ram set voltage to 2.7v or 2.8v. cas 2.5-4-4-8-T1 and divider depends on how good your ram OCs.My OCZ PC3200 Platinum rev2's did 300 with no problem at 2.5-4-3-7-T1 with 2.75v and 1:1 text/html 2008-04-24T21:47:35-05:00 Dexter Pim http://www.hardwareanalysis.com/content/topic/71354/?l=1#0 Hi everybody, new member here and,<br /> <br /> I recently bought up to a Toledo dual-core processor! 3800+ model. Woo! I know I know, but I'm on a budget <img src="http://media.hardwareanalysis.com/smilies/smile4.gif" width="14" height="14" border="0" alt=";)" title=";)"><br /> <br /> It's a Socket 939 CPU, upgraded from a single core San Diego. My motherboard has the nForce-4 Ultra chipset.<br /> <br /> Anybit, it's a stock 2.0GHz, and I've only been able to get it to 2.2 stable!!! <img src="http://media.hardwareanalysis.com/smilies/smile2.gif" width="14" height="14" border="0" alt=":(" title=":("> Any pointers for me? THANKS!